Skip to content
English
  • There are no suggestions because the search field is empty.

C-Pen Reader 2 - Roman numerals 1-39 blocked from being read out in Exam Mode

Release

C610x | Releases | R2 1.0.11 (009)

Date

Nov 4, 2025

Version

R2 1.0.11 (002) AND R2 1.0.11 (009)

Description

TTS Reading Rules - Roman numbers

Contributors

 

What is included in this release?

Release R2 1.0.11 (009), dated November 4, 2025, blocks Roman numerals I–XXXIX (1–39) from being read aloud by the TTS engine when the C-Pen Reader 2 is in Exam Lock mode. Installation requires two firmware files applied in a specific order.

What are the new features in this release?

Roman numerals I–XXXIX (1–39) are now blocked from being read aloud by the text-to-speech (TTS) engine when the device is in Exam Lock mode.

How do you download and install this update?

 

This update consists of two essential steps that must be completed in the specified order.

  1. First, upgrade to updatesys_1.0.11.002.BIN.
    Failure to do this may result in permanent damage to your C-Pen Reader 2.

    Complete Step 1 first

  2. Next, upgrade to updatesys_C610R_1.0.11.009.BIN.

Steps

  1. Download and unzip the file from: https://cpenfiles.blob.core.windows.net/c610x-x2000/C610R-R2-1.0.11.009.zip. The ZIP archive contains both updatesys_1.0.11.002.BIN and updatesys_C610R_1.0.11.009.BIN.

  2. Connect your Reader 2 to your computer in U-disk mode. For instructions on how to enter U-disk mode, refer to your device's user manual or the video guide linked at the end of this article.

  3. Copy updatesys_1.0.11.002.BIN to Reader 2 (USB disk). This upgrade must be completed before proceeding to the next step.

  4. Eject Reader 2 disk.

  5. On the pen, go to Settings > System Settings and select Software upgrade. Select Yes to confirm and wait for the upgrade to complete.

  6. Re-connect your Reader 2 to your computer in U-disk mode.

  7. Copy updatesys_C610R_1.0.11.009.BIN to Reader 2 (USB disk).

  8. Eject Reader 2 disk.

  9. On the pen, go to Settings > System Settings and select Software upgrade. Select Yes to confirm and wait for the upgrade to complete.